If you don't find the help you need here, see the help documentation in the Omega One product you've installed (see the right hand bar for links to these sections). If all else fails, please contact us here.
 

Updating
How do I update my copy of Battery Pack / Battery Pack Pro?
I purchased from CompUSA or Amazon. How do I update?

Installation
How do I install?
Battery Pack Pro won't install (installing from a PC)
Installing (no PC available)
Installing an "over the air" or ".cab file" version
Battery Pack won't install on my original Pocket PC device
How do I get my free update?
Battery Pack Pro asks me for a registration code
Am I installing the demo or full version?

Uninstallation
How do I uninstall?
Battery Pack / Battery Pack Pro won't uninstall

Version
What version of Battery Pack / Battery Pack Pro am I using?

Battery Pack Pro (Smartphone)
I can't see anything on the home screen
Battery Pack Pro says "Unable to find Battery Bar or one of it's components"

General
The Pocket PC continually soft resets
Can I retain my user settings after a hard reset?
How do you skin Battery Pack Pro?
How do I get Battery Pack Pro to speak to me?

Battery Bar
I can't see the Battery Bar (iPAQ)
How do I change what's shown on the Battery Bar?
My battery life reports it's lower than I expected.
When I save settings the device locks up.
How do I change the default File Explorer used by Battery Pack Pro?
Battery Bar slows down the device
How do I reset the Battery Time Remain data?
Which external batteries are supported?
Will BP remember the battery time if the expansion battery is removed?
Where has the Expansion battery display gone?
Reporting backup battery is low
How do I get memory and storage to scroll automatically on Battery Bar?
The backlight slider doesn’t work
What does the ‘a’ stand for on Battery Bar?
I can't find the network monitor
My Today Plug-ins won’t stay in the order I put them in on the Today screen

Power Store
What battery information is it showing in Power Store?
Why isn't Power Store showing all my storage cards?

Program Bar
How do I change the icons on the Program Bar?
Can I use another File Explorer program to view folders?
All the Program Bar icons look the same
When I soft reset, Program Bar disappears
Why does Program Bar find double entries?
Does Program Bar find programs installed after Battery Pack Pro has been installed?
Why can't I see my documents as links in Program Bar?
How do I add a custom link to Program Bar?
Adding a custom link to a folder
Setting up Program Bar leaves blank spaces or unwanted icons
Why is the date in standard US format on Program Bar?
Where is the Bluetooth shortcut?
My icons have suddenly changed on Program Bar

Power Alert
I'm getting two sound notifications or no sound notifications at all.

Power Task
The close button isn't appearing on the top of the screen.

Power Bars
How can I move the battery & memory bars in the title bar?
Battery/memory and time/date overlap on the title bar

Power Time
Change from the default currency to another currency
How do I change the cities on Power Time?
Power Time appears then disappears from the screen quickly

Power Adjust
What does the low battery notification toggle do in Battery Pack?

Updating
I purchased from CompUSA or Amazon. How do I update?
You can download a patch to update a bug when switching from portrait to landscape. Click here to download the patch.

Currently users who purchase a retail boxed copy of Battery Pack Pro are not entitled to any updates or upgrades. However, if you wish to purchase the latest version of Battery Pack Pro at a healthy discount, click here.

Installation
How do I install?

• You should have received a file called "BPPOL.exe" or similar - copy it to a folder on your PC. You can rename to another name if you like.
• Make sure your Pocket PC is connected correctly to your PC, and that ActiveSync is showing it as properly connected.
• Open up this folder and double click on this file. A window should open asking you to unzip some files. Click "Extract". Don't change anything on this screen
• Installation should begin. If it fails, please click here for alternate installation instructions.
   

Battery Pack Pro won't install (installing from a PC)
If you are having trouble with the standard method of installation you can use this alternative method instead. This specifically involves locating the .cab file in the c:\Program Files\Omega One\BPP directory:

• Dock the Pocket PC.
• Right click on the ActiveSync icon on the system tray and select "Explore".
• Open an explorer window where the batt.arm.cab file is on your desktop PC (usually c:\Program Files\Omega One\BPP).
• On the desktop pc drag the .cab file from the Explorer window and drop it into the ActiveSync Explore window (this copies the file to the Pocket PC).
• Undock the Pocket PC and select Start | Programs | File Explorer.
• Find the .cab file and tap on it. Installation will begin.
   

Installing (no PC available)
If no PC is available, the Battery Pack Pro cab file should be used to install directly to the Pocket PC. This file can be requested from most places that sell Battery Pack Pro. Just ask for the "over the air" version or "cab file" version.

Once the cab file has been received, copy it to any folder on your Pocket PC using the normal method you use to copy files to the Pocket PC. Once it's been copied over, select Start | Programs | File Explorer on your Pocket PC and navigate to the folder the cab file was copied to. Tap on the cab file to run it. Installation will begin.

Installing an "over the air" or ".cab file" version
"Over the air" is meant for wireless download. Customers receive a ".cab" file, which is copied to the Pocket PC and installs from there (instead of from the desktop). It's basically a different method of installation usually used by Mac owners and people who do not use a desktop pc, or if downloading directly to the Pocket PC from a wireless network.

If you receive a single ".cab" file, you will need to use this method to install:

• Dock the Pocket PC.
• Right click on the ActiveSync icon on the system tray and select "Explore".
• Open a window where the .cab file is on your PC.
• Drag the .cab file into the ActiveSync Explore window (copies the file to the Pocket PC).
• Undock the Pocket PC and select Start | Programs | File Explorer.
• Find the .cab file and tap on it. Installation will begin.

Battery Pack won't install on my original Pocket PC device
From v5.1.1 Battery Pack doesn't come with SH3 and MIPS files, which were used by original Pocket PC devices (excluding the Compaq iPAQ). However, you can still install the latest version of Battery Pack:

First, check your Pocket PC processor type. See Start|Settings|About. It will either list an SH3 processor or a MIPS processor. SH3 users should download this version, MIPS users should download this version.

Once you've copied the files to your PC, unzip them, then copy the file to your Pocket PC. Uninstall your current version of Battery Pack, then use File Explorer to run the file. It should install on your system.

How do I get my free update?
Battery Pack customers who purchased before April 21st 2004 can receive free updates by uninstalling their previous full version of Battery Pack, then installing the latest demo version from here. This will result in the latest full version of Battery Pack on the Pocket PC.

Alternately, you can install from the place you originally purchased from. See the e-mail receipt you received when you purchased Battery Pack. When you install, bypass the registration code screen by tapping "Enter" (on the on-screen keypad). This will install the latest full version of Battery Pack.

If you don't have the previous full version and need a new copy, contact our tech support department with your order details.

Battery Pack Pro asks me for a registration code
When you purchased Battery Pack Pro, you should have received an e-mail with a unique registration code in it. This code should be a combination of ten letters & numbers. When Battery Pack Pro asks you for the registration code, enter this code and tap OK to unlock the product.

If you purchased a previous version of Battery Pack, you will need to repurchase to get Battery Pack Pro. Click here to purchase for a greatly discounted price.

Am I installing the demo or full version?
The demo version will end in "D" (i.e. "BPPOD.EXE") and the full version will end in "L" (i.e. "BPPOL.exe"). Alternately, it will tell you on the first unzip screen. The title bar will have "(trial)" at the end.

Uninstallation
How do I uninstall?
You need to go to Start | Settings | System | Remove Programs. Then highlight Battery Pack Pro and tap Remove. Follow the instructions on the screen (soft reset the device and repeat the ‘remove programs’ procedure).

Battery Pack / Battery Pack Pro won't uninstall (.dll file still in use)
You need to first do a soft reset, then install Battery Pack / Battery Pack Pro again. When it says programs are running (Battbar.dll most likely), continue with the installation and just don't copy over this file. It's very important installation completes, although copying over the files running doesn't matter.

You should then be able to uninstall. See the Help file for information on how uninstallation should occur. Note, you will need to perform a soft reset before uninstallation will be successful.

Then please install the full version (BPPOL.exe) of Battery Pack / Battery Pack Pro. It should install without any warnings of files in use and all should work. You should install to main memory (if you have a storage card it will ask you).

Version
What version of Battery Pack / Battery Pack Pro am I using?
When you install the program you can click on the help icon on the Battery Bar and it will tell you the major version number e.g 2.0.2.

Alternatively when you run the BPPOL.EXE (or similar) install file it tells you the full version number, e.g. 2.0.2, on the extract screen (the version is in the title bar).

Battery Pack Pro (Smartphone)
I can't see anything on the home screen
To enable the Battery Bar and Program Bar home screen plug-ins, go to Start | Battery Pack Pro, then select "1 Add/Remove plug-ins". Select "Both", then press the "Add" soft key. The plug-ins will be added.

If a problem occurs during adding, go to Start | Settings | Home Screen and change "Home screen layout" to "Windows Default", "Color scheme" to "Default" and "Background Image" to "Default".

Battery Pack Pro says "Unable to find Battery Bar or one of its components"
This is usually because the Battery Bar and/or Program Bar plug-ins haven't yet been enabled. To do this, see the FAQ item "I can't see anything on the home screen" to enable them.

General
The Pocket PC continually soft resets
Make sure the latest version of Journal Bar is installed, as older versions can cause problems with a new version of Battery Pack Pro. If the latest version is installed, or Journal Bar isn't used, then check the other plug-ins on the today screen. The today screen can only use so much memory to run all the today plug-ins, and this maximum may be being reached. Getting the latest updates to other 3rd party today plug-ins may help, as if they are not designed for Windows Mobile 2003 Second Edition or newer operating systems they may be using a large amount of memory to run correctly.

Can I retain my user settings after a hard reset?
The settings are actually in the registry. You could retain your settings during a hard reset of the device by using a registry editor program (Kilmist do an excellent program) to export the HKEY_CURRENT_USER\Software\OmegaOne key to a .reg file, then import it after a hard reset.

How do you skin Battery Pack Pro?
Click here

How do I get Battery Pack Pro to speak to me?
Make sure the volume on your Pocket PC is all the way up. At low volumes the speech notifications can be difficult to hear.

Altering the Battery Bar options will allow you to tune when Battery Bar speaks to you. To do this, select Start|Settings|Today. Select the Items tab, select Battery Bar, then tap the Options button. This will display the Battery Bar options. Check the speech events you want to hear, along with when you want to battery / memory warnings, and how often you wish to be notified.

The 'battery is fully charged' message sounds once when the value of the battery trips up from a lower value (e.g. 99%) to 100% so if you are not near the device at the time you will not hear this.

Please try changing the value that the low battery warning sounds at and see if you can get a reaction out of it. The warnings may not sound if you are not on the Today page at the time so this is another possibility why you have not heard the sound.

Please also ensure that the program is installed to the main memory and not to a storage card.

You could try installing a new set of sound files to see if that helps (you can get these from here, or try reinstalling (deleting user settings when prompted during uninstallation).

Battery Bar
I can't see the Battery Bar (iPAQ)
Go into the Today Options screen (Start | Settings | Today | Items tab) and uncheck 'iPAQ Entertainment' and the Battery Bar and Program Bar should appear on the today screen. If you are still having problems please firstly try re-downloading the file in case there was a problem during transfer the first time, then reinstall.

How do I change what's shown on the Battery Bar?

• Select Start, Settings, Today.
• Select the Items tab.
• Select Battery Bar and tap the Options button.
• Select the Customize tab.

The Battery Bar can display up to 6 "banks" of information, some of which may need to be scrolled right to view the information. Select which information you wish to view here.

If you wish to display information for 2 different storage cards, this can be viewed through one storage card "bank", or by selecting storage card in 2 "banks" and setting each one to display different cards when back on the Today Screen.

My Battery life reports it's lower than I expected
Since everybody uses their Pocket PC in different ways, the drain on the battery will be different. Battery Bar "learns" how you use your Pocket PC to accurately display the battery time remaining for how you use your device. After a certain time it will start displaying battery time remaining. Over the next few days of use the time remaining display will steadily get more and more accurate.

Note: if you usually keep your Pocket PC fully charged all the time it may take Battery Bar longer to generate an accurate battery time remaining figure. In this instance, let your Pocket PC discharge a little (down to 50-60% battery life) once or twice.

Manufacturers advertise their Pocket PC will operate for a certain amount of hours from a full charge. You will most likely find the Battery Time Remain display will be a lot lower than this figure. This is because your Pocket PC drains the battery even when it is "off" (actually in standby mode). Battery Time Remain only measures the time you are using your Pocket PC (the time that is the most important to you!).

When I save settings the device locks up
Toshiba e800 devices running Windows Mobile 2003 SE have been seen to have this problem. As a workaround, soft reset the device and you should have the updated settings stored.

How do I change the default File Explorer used by Battery Pack Pro?
To change the file explorer used by Battery Bar and Program Bar, a registry value change is required. Under the HKEY_CURRENT_USER \ Software \ OmegaOne \ BatteryBar key, create a string value "Explore" with the full path to the alternate file explorer. e.g. to set it up to the default file explorer, you would enter "\windows\fexplore.exe". You'll have to then do a soft reset so that Battery Pack / Battery Pack Pro can pick up the changes.
Note, we haven't tested this with all Explorer programs.

Battery Bar slows down the device
Although this is a rare occurrence, it has been seen by a few users. To minimize the processing power Battery Bar uses, disable the network monitor in the Battery Bar options, and slow down the update rate in the "General" Battery Bar options page.

How do I reset the Battery Time Remain data?
To reset the battery life data you just need to go to the settings screen for Battery Bar (Start | Settings | Today | Items | Battery Bar | Options) and check 'reset battery time remain'.

Which external batteries are supported?
Only batteries used on iPAQs which were included in the Expansion Sleeve are supported at this time. iPAQ models 31xx, 36xx, 37xx, 38xx, 39xx, 51xx and 54xx from 2000 - 2003 typically used these.

Will BP remember the battery time if the expansion battery is removed?
Yes the program will remember the battery time remaining if the CF pack is removed and put back. A hard reset will mean the program has to learn about the battery usage once more - hard reset sets the machine back to its factory defaults. A soft reset is just hitting the reset button so this wouldn't reset the program.

Where has the Expansion battery display gone?
Expansion batteries were shown separately in previous versions of Battery Pack, however since the release of Battery Pack Pro 2.0.0. the two battery totals have been shown as one total together on the Battery Bar to save space on the screen.

Reporting backup battery is low
A red exclamation mark may appear next to the battery icon on the Battery Bar. This indicates that the information the device is reporting to Battery Pack Pro appears as the backup battery is low. It is possible that the device does not have a back up battery but the way this is reported to Battery Pack Pro makes it ambiguous.

How do I get memory and storage to scroll automatically on Battery Bar?
If you tap the "storage icon" (actually the memory icon) it will switch to the other. Tap the slider next to it and it will launch the memory applet. Same for the storage card icon - it should load the File Explorer, so you can see what's on your storage card.

The backlight slider doesn’t work
Unfortunately the backlight slider does not work with every device. It works with most iPAQs and some Toshiba and Dell devices. We are continuing to work on adding support for additional devices for further versions of Battery Pack Pro where this becomes possible (due to manufacturer’s changes). On some Pocket PCs the backlight can only be turned on and off and no brightness adjustment is possible. This is due to the ability of control which is exposed to us.

What does the ‘a’ stand for on Battery Bar?
The 'a' icon turns auto-brightness on and off for devices that support this, namely iPAQ 3800, 3900, 5400 & 5500 series devices.

I can't find the network monitor
The Network Monitor can be found in Power Store (tap the battery/folder icon on the left hand side of Battery Bar), you can place it on the Battery Bar by going into the options screen (tap the shortcut red/white icon on the right hand side of Battery Bar) and add it to one of the locations on Battery Bar.

To access this feature you must ensure that you have Battery Pack Pro installed - for this you must have input your registration code during installation, if you didn't do so you will have Battery Pack 2004 installed. In this case you should uninstall, download the installation file from your email receipt (the file is called BPPOL.exe) and input your registration code when requested during installation.

My Today Plug-ins won’t stay in the order I put them in on the Today screen
Please try the Power Adjust application which is supplied with Battery Pack Pro (you can download a demo from our website if you do not have this installed), this has a ‘clean today plug-in ordering’ feature which should resolve this issue.

Power Store
What battery information is it showing in Power Store?
Power Store shows information for the main battery and the backup battery. On certain Pocket PC devices two batteries are used to ensure data is backed up - a main rechargeable battery and a separate coin cell backup battery. Power Store shows information for both of these batteries.

Some Pocket PCs only have one battery - the main rechargeable battery. In this case the backup battery will display in Power Store with no information or as fully charged.

Power Store does not display information for any external add-on batteries.

Why isn't Power Store showing all my storage cards?
Power Store will show up to two storage cards. However, Battery Bar has the ability to manually or automatically cycle through all storage cards on the Pocket PC.

Program Bar
How do I change the icons on the Program Bar?

• Select Start, Settings, Today.
• Select the Items tab.
• Select Program Bar and tap the Options button.
• Select the Customize tab.

To change the icons, tap the icon you wish to change, then select the program to change it to from the list at the top of the screen. You can leave a blank space there if you wish, by selecting *no icon* from the list.

You can also drag and drop the icon to change places. Full details are available in the help for Program Bar (see help for Battery Pack Pro).

You should add the icons you wish to appear, in the order you wish them to appear on the top rows of the Program Bar and then select in 'number of lines' the number of rows you wish to appear on the Today screen, i.e. if you wish 2 rows to appear you choose '2' in this box and ensure that you have placed the icons you wish to appear on the top two rows.

To show just the icons you require on Program Bar you should place all required icons on the upper lines in the settings screen. You can then set Program Bar to show the minimum amount of lines required. Once Program Bar has been set up to your preference you should not need to do this again as when you uninstall the program to install future updates you can choose to keep your user settings.

Can I use another File Explorer program to view folders?
It's possible to change both Battery Bar and Program Bar to use another file explorer program. It can be done by adding two new registry entries:

Battery Bar
Key: HKEY_CURRENT_USER\Software\OmegaOne\BatteryBar
String Value: Explore
Set the string value to the full path name of the new file explorer program. For example:
\Program Files\Resco\Explorer.exe

Program Bar
Key: HKEY_CURRENT_USER\Software\OmegaOne\ProgramBar
String Value: Explore
Set the string value to the full path name of the new file explorer program. For example:
\Program Files\Resco\Explorer.exe

All the Program Bar icons look the same
If the icons are not displaying correctly you should uninstall, delete user settings and reinstall. You will then have to set up your icons again, however you can use the drag and drop method in the settings screen which should now show the correct icons. You should also ensure that Battery Pack Pro is installed to the main memory.

When I soft reset, Program Bar disappears
This is probably due to installing Battery Pack Pro onto a storage card. When the Pocket PC restarts it initializes the today plug-ins before it's mounted all the storage card volumes (so they can be used), hence it thinks the today plug-ins are not present. If you install to main memory the program should work without any problems.

If Battery Pack Pro is installed to the main memory then it may be a problem with the Today plug-in ordering. Please try uninstalling and reinstalling - if you have other Today plug-ins installed it may help to uninstall them and reinstall Battery Pack Pro first.

Alternatively you may need use a registry editor program (Kilmist's Registry Editor is a good product) to go into the HKEY_LOCAL_MACHINE\Software\Microsoft\Today key and alter the "Order" setting for Program Bar to another value.

Why does Program Bar find double entries?
Program Bar may find multiple references to the same program whilst it searches on the Smartphone. The reference more often than not point to the same product, so either can be chosen.

Does Program Bar find programs installed after Battery Pack Pro has been installed?
Every time you go into the Program Bar options page it should rescan for new applications. It will rescan for new settings applets only if new ones have been added (or some have been removed). You should make sure the applications are in the \windows\start menu folder, or Program Bar won't find them. You can use a custom link to find others not in these folders.

Why can't I see my documents as links in Program Bar?
Only documents in the main memory can be linked (not on a storage card, unless you create a custom link to do this - see the next section for information on how to do this).

How do I add a custom link to Program Bar?
To add a custom link you need to access the Program Bar options screen. Then highlight the icon / space where you want the new shortcut to be located. Select "* Custom Link *" from the drop down list for the icon you want. It will bring up the custom link dialog box and you type in the custom link.
For example, the calculator would be "\windows\calc.exe" for the path, and nothing for the optional parameter. The optional parameter is used to pass information to the program you want to run. For example, you could run Internet Explorer with the web site you want to display: e.g. "\windows\iexplore.exe" for the path, and "http:/www.msn.com/" for the parameter. An Excel file on the CF card would be \windows\pxl.exe in the first box and then in the parameter \cf card\xxxxx.pxl (where xxxxx is the name of the file) for a Word file it would be \windows\pword.exe then in the parameter \cf card\xxxxx.psw (where xxxxx is the name of the file).

The link has to be found by using File Explorer to look for the program on the device. The program file is usually an .exe or a .lnk file. Program Bar should show all the programs on your system without you having to touch this option. This option is intended for advanced users who have manually put a program on a storage card to save program memory space.

To tell if a program is a .lnk or a .exe file, in File Explorer it helps to look at the size of the file. If it's something like "35B" (meaning 35 bytes), then it's got to be a link. If it's bigger than 200 bytes, it's got to be an EXE.

If you browse the Pocket PC directories using the PC (right click on the ActiveSync icon and select "Explore"), then it's much more obvious - go to detailed view and it shows the file type.

You can also paste a shortcut to the Start menu and Program Bar should then find the program automatically. You should use Explorer to highlight the program, press ‘copy’ then go to Windows\Start Menu\Programs folder and "Paste Shortcut" which will copy a shortcut. This is useful if you can't get the custom shortcut to work first time.

Adding a custom link to a folder
To add a custom link you need to access the Program Bar options screen. Then highlight the icon / space where you want the new shortcut to be located. Select "* Custom Link *" from the drop down list for the icon you want. It will bring up the custom link dialog box and you type in the custom link.

To add a link to a folder you need to type into the ‘enter the path and file name of the custom link’ box: \windows\fexplore.exe and into ‘optional’: \storage card\

This will link to a folder in the root of the storage card, but you can change the Path to be any folder on the Pocket PC.

Setting up Program Bar leaves blank spaces or unwanted icons
To adjust the programs on Program Bar you need to assign required icons to the blank spaces. In doing this you can put all your required icons on the higher lines and then in the options screen choose to show fewer lines which will mean the lower ones with blank or unwanted icons are not shown.

You should only need to do this once as when you uninstall the current version in order to update you can elect to keep your user settings which includes the Program Bar set up.

Why is the date in standard US format on Program Bar?
The format is currently fixed to: ddd, MMM d

ddd - The day of the week as a 3 letter concatenation
MMM - The month as a 3 letter concatenation
d - The day of the month (1-31).

However, for non-English Pocket PCs this will localize to the 3 day letter concatenations for this language.

Where is the Bluetooth shortcut?
To add a shortcut to the Bluetooth settings on Program Bar you need to go into the Setting screen for Program Bar and add a shortcut to ‘Settings – Bluetooth’ to one of the lines on the Bar. If you can not see this item it may be that it is not on your Pocket PC – to check you need to go to Start | Settings | Connections, you should see a Bluetooth icon here.

My icons have suddenly changed on Program Bar
The programs concerned are most likely installed on the storage card. Go into the Today options page and then out again, or a soft reset, to resolve this. If it continues to happen please try uninstalling, deleting user settings and reinstalling.

Power Alert
I'm getting two sound notifications or no sound notifications at all.
This is most likely because the standard alarm sounds are still activated. To turn them off, select Start | Settings | Sounds & Notifications. Select the Notifications tab, and the Reminders event. Uncheck the Play Sound check box, then tap OK.

Power Task
The close button isn't appearing on the top of the screen.
To enable the Power Task button, make sure the Program Bar displays the "Power Adjust" icon. Tap the Power Adjust icon on the Program Bar and make sure the "Power Task button & menu" check box is checked.

Note, Power Task may not work with other programs which insert elements into the top menu bar. Power Task is not designed to be compatible with these programs.

Power Bars
How can I move the battery & memory bars in the title bar?
This is no longer possible in Battery Pack Pro v3.

Battery/memory and time/date overlap on the title bar
The battery/memory details & date/time information are more or less exclusive as they obscure one another. We thought we'd give the option as people might like to see date/time and find it more important than battery/memory info on the title bar. You can move the battery and memory bars around using the registry values above.

Power Time
Change from the default to another currency
It isn't currently possible to change the exchange rate from the default, however we hope to add this in the future.

How do I change the cities on Power Time?
Go into Power Time you will see four icons in the bottom right hand corner of the map. The one on the right hand side is the settings button (orange icon), tap that and it will take you to the settings screen to change the cities.

Power Time appears then disappears from the screen quickly
If you are also using Journal Bar on the device you must ensure that it is the latest version - 3.4.1 - as earlier versions are not compatible with Power Time.

Power Adjust
What does the low battery notification toggle do in Battery Pack?
This allows you to control the the notification in the Settings | Sounds & Notifications applet. It adds a "Low Battery Warning" item to allow you to edit it specifically. Battery Pack Pro can suppress the pop-up warning box, however the "bleep" warning, and the icon at the top of the title bar will still appear when the battery is low.

Back to top